Off grid solar set SOLARFAM 200Wp, 12V, 150Ah battery, inverter 230VAC 600W

Solar island set with a favorable price / performance ratio for places without electricity. The set is designed economically, and designed for lower energy consumption. Ideal for garden houses, gazebos, cottages, boats, or even motor homes, where the purchase price is decisive. The backup battery with a higher capacity manages to supply electricity to appliances for a longer period of time.

Attention! Only a suitably qualified person should always install the solar system!
NOTE: The assembly photo is for illustration only. The components actually supplied may differ from the components shown in the picture. This does not affect the listed parameters or assembly function.

The set works with a system voltage of 12V.

The solar system contains the following components:

2x Solar panel SOLARFAM 12V/100W shingle monocrystalline all-round "Cat. number: 04280456
1x Lead-acid accumulator Gel Solarfam 12V 150Ah "Cat. no. : 04250611
1x DC circuit breaker 16A double-pole GETI GF-J01, cat. number: 04290185
1x Voltage changer CARSPA P600 12V/230V 600W PURE USB sine waver, cat. number 04230595
1x Battery disconnector GETI GF-S01, cat. number: 04290202
1x Solar regulator SOLARFAM PWM 12-24V/30A, cat. number: 04280139
1x SOLARFAM solar cable 2x10.0M-4mm2 red-black "Cat. number: 04290056"
1x MC4 merge connector negative "Cat. no.: 03360267"
1x MC4 merge connector positive "Cat. no.: 03360268"
1x Actuator to accumulator 32A "Cat. no. : 04290199



The set contains a set of two cables 10m long. MC4 connectors are pressed at the ends of the cables for connection to the solar panel. Part of the cable will also be used to connect the solar controller and the battery. The inverter is equipped with DC power cables with terminals.

- install the safety switch for the photovoltaic panel on the positive cable between the panels and the controller
- install the safety switch for the battery on the positive cable as close as possible to the battery
- Install a fuse switch disconnector to the inverter on the positive power cable of the inverter

The assembly does not contain mounting elements. It is necessary to order separately according to the planned method of placement.