Off grid set SOLARFAM 180Wp, 12V, battery 100Ah, invertor 230VAC 600W

Solar island set with a favorable price / performance ratio for places without electricity. The set is designed economically, and designed for lower energy consumption. Ideal for garden houses, gazebos, cottages, boats, or even motor homes, where the purchase price is decisive. The backup battery with a higher capacity manages to supply electricity to appliances for a longer period of time.

Attention! Only a suitably qualified person should always install the solar system!
NOTE: The assembly photo is for illustration only. The components actually supplied may differ from the components shown in the picture. This does not affect the listed parameters or assembly function.

The set works with a system voltage of 12V.

The solar system contains the following components:

1x Solar panel 12V/180W monocrystalline shingle black frame 1230x705x30mm SOLARFAM Cat. no.: 04280311
1x Solar regulator MPPT Carspa MH-R2420, 12/24V, 20A Cat.No.: 04280270
1x DC circuit breaker 16A double-pole GETI GF-J01 Cat. no.: 04290185
1x Actuator to accumulator 32A "Cat. number: 04290199
1x Battery disconnector GETI GF-S01 Kak. no. 04290202
1x Solar cable SOLARFAM 2x10.0M-4mm2 red-black "Cat. no. : 04290056
1x Voltage changer CARSPA P600 12V/230V 600W PURE sine wave USB cat. number: 04230424
1x Victron MEGA fuse holder "Cat. no.: 04290022
1x MEGA fuse for photovoltaic systems 100A/32V Cat. no.: 04290015
1x Battery Pb carbon 12V 100Ah Solarfam for solar cat. number: 04250527

The set contains a set of two cables 10m long. MC4 connectors are pressed at the ends of the cables for connection to the solar panel. Part of the cable will also be used to connect the solar controller and the battery. The inverter is equipped with DC power cables with terminals.

- install the safety switch for the photovoltaic panel on the positive cable between the panels and the controller
- install the safety switch for the battery on the positive cable as close as possible to the battery
- Install a fuse switch disconnector to the inverter on the positive power cable of the inverter

The assembly does not contain mounting elements. It is necessary to order separately according to the planned method of placement.