Victron Energy Sun Inverter 12V/250A-15 IEC

The Victron Energy voltage converter is an efficient and reliable voltage converter built on a proven and field-tested platform. The inverter incorporates a robust toroidal transformer that has proven its reliability in Victron Energy inverters for many years.. Key Features:. High starting power:. Required to start loads such as inverters for LED bulbs, halogen lamps or power tools.. ECO mode:. In ECO mode, the inverter switches to standby mode when the load falls below a preset value (min. load: 15 W). Once in standby mode, the inverter will switch on for a short period of time (adjustable, default: every 2.5 seconds). If the load exceeds the preset level, the inverter will remain on.. PWM solar charger:. The solar charger provides battery charging with energy obtained from your solar panels. The charging algorithm is programmable.. Remote on/off:. The Phoenix Inverter Control VE.Direct Remote panel (not included) can be used to turn the inverter on or off remotely. Alternatively, the remote switch can be plugged into the two-pole connector or between the battery plus and the left contact of the two-pole connector.. LED diagnostics:. Please refer to the manual for a description of each condition.. Bluetooth:. Inverter and solar charger parameters can be read, monitored and configured via Bluetooth. VictronConnect app.. VE.Direct communication port:. The VE.Direct port can be used to connect to a GX device, GlobalLink 520 for monitoring through the VRM portal or to connect to a computer for monitoring or configuration using the VictronConnect app.. Monitoring via the VictronConnect app or GX device:. Inverter input and output voltages and % load. Solar energy, voltage and current. Operating status and alarms. Fully configurable via the VictronConnect app:. Low battery voltage alarm triggering and level reset. Low battery shutdown and restart levels. Dynamic shutdown: load-dependent shutdown levels. Output voltage 210 - 245 V and frequency 50 Hz or 60 Hz. ECO mode on/off and ECO mode sensing level. Battery charging current, algorithm and voltage. Temperature compensation for battery charging or low temperature level reduction. Load transfer to another AC power source: automatic transfer switch:. For our low power inverters, we recommend our Filax automatic transfer switch. Filax features a very short switching time (less than 20 milliseconds), so computers and other electronic devices yes. continue to operate without interruption.. DC and PV connections with screw terminals:. No special cable terminals or tools are required for installation. Available with IEC-320 socket:. IEC-320 plug included.. Specifications:. 230 V AC +/- 3% 50 Hz or 60 Hz +/- 0.1%.. continuous power at 25 oC: 250 VA / 200 W. Peak power: 400 W. max. efficiency: 87%. self-consumption at zero load: max 4.2 W. self-consumption in ECO mode: max 0.8 W. 230 V AC connection: IEC-320 plug. Operating temperature range: -40 to +60 oC (fan-assisted cooling). Humidity (non-condensing): max. 95%. Protection class: IP21. weight: 2.4 kg. Dimension: 86 x 165 x 260 mm