Multitester - wattmeter V-A-P-F-COSfi meter PZEM022

Multitester - wattmeter V-A-P-F-COSfi meter PZEM022. Product parameters:. - measurement of electrical parameters (voltage, current, active power, energy, frequency, power factor). - overload alarm above adjustable threshold value - flashing alarm and backlight. - the measured energy can be reset using the button. - storable data after shutdown. - all data on the backlit LCD display - the backlight can be turned off. Technical parameters:. - working and measured voltage: 80 ~ 260VAC. - measured current: AC 0–100A / 22000W contactless. - operating frequency: 45–65Hz. - measurement accuracy: grade 1.0. - dimensions: 90×50×20mm. Display:. Power. range: 0.2~22000W. <10W display format: 0.00 ~ 9.99W. <100W display format: 10.0~99.9W. <1000W: 100~999W. <10000W display format: 1.00 ~ 9.90 kW. >10000W display format: 10.0 ~ 22.0kW. Energy. range: 0 ~ 999 kWh. <1kWh display format: 0 ~ 999Wh. <10kWh display format: 1.00 ~ 9.99kWh. >10kWh display format: 10 ~ 999kWh. Tension. range: 80~260VAC. display format: 80 ~ 260V. Current. range: 0.001~100AAC. <10A display format: 0.000 ~ 9.999A. >10A display format: 10.00 ~ 99.99A. Frequency. range: 45~65Hz. display format: 45~65Hz. Power factor. range: 0~1PF. display format: 0.00~1.00PF. Settings:. Power reset. - hold the button until the energy value flashes, then release. Briefly press the button to reset the value on the display.. Setting the alarm threshold. - hold the button until "SET CLr" appears on the LCD display. Then release.. - the display shows the current alarm value. The last digit starts flashing. By repeatedly pressing the button briefly, the alarm value can be changed.. - after completing the setting, press the button for 5 seconds to save. The active energy threshold range is 0.0~2.5kW.. Notice:. - this module is only suitable for indoor use.. - the applied load must not exceed the rated power. - observe the wiring according to the diagram on the back of the product